saw bandpass filter part no.: actf8042/866mhz/10nh/ dcc6 product type: customer: saw filter part no.: customer part no.: actf8042/866mhz/10nh/ dcc6 issued date: prepared by checked by approved by
the act f 8042 is a low - loss, compact, and economical surface - acoustic - wave ( saw ) rf filter in a surface - mount ceramic dcc6 case with center frequency 866.000 mhz 1. package dimension (dcc6) 2. marking 3. matching circuit laser mar king 4. typical frequency response pin configuration 2 input 5 output 1, 3, 4, 6 ground sign data (unit: mm) sign data (unit: mm) a 1.900.1 e 1.350.15 b 0.640.1 (x6) f 3.800.1 5 c 1.000.1 (x5) g 3.800.15 d 1.270.1 (x4)
5. performance 5 - 1. maximum ratings rating value unit maximum input level p 0 dbm maximum dc voltage v dc 10 v operable temperature range t a - 10 to +65 storage temperature range t stg - 40 to +85 5 - 2. electronic characteristics ? caution: electrostatic sensitive device. observe precautions for handling ! c e a act 2006 . all rights reserved . 1. t he frequency f c is defined as the midpoint between the 3db frequencies. 2. unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected t o a 50 test system with vswr1.2:1. the test fixture l and c are adjusted for minimum insertion loss at the filter center frequency, f c . note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. 3. unless noted otherwise, specifications apply over t he entire specified operating temperature range. 4. the specifications of this device are based on the test circuit shown above and subject to change or obsolescence without not ice. 5. all equipment designs utilizing this product must be approved by the appropri ate government agency prior to manufacture or sale. 6. our liability is only assumed for the surface acoustic wave (saw) component(s) per se, not for applications, processes and ci rcuits implemented within components or assemblies. characteristic minimum typical maximum unit center frequency f c D 866.000 D mhz 3db bandwidth bw 3 D 19 D mhz usable passband bw D 2.0 D mhz insertion loss il within f c 2.0 mhz D 2.5 4. 0 db amplitude ripple (p - p) ? within f c 2.0 mhz D D 1.5 db absolute attenuation f c 2 00.0 ~ f c 30.0 mhz f c 50.0 ~ f c 2 00.0 mhz 42 45 52 55 D D db db terminating impedance 50 // 10nh
|
